Innkeeper LTD
Product Range
AutoHybrid
Auto-Answer Hybrid.
This simple, passive, Auto-answer/disconnect telephone line hybrid allows simultaneous send and receive audio through analog telephone lines. Suitable for monitoring remote locations, IFB feeds, and many simple studio, conferencing, and PA telephone interface applications. The dual transformer hybrid is capable of 20 dB nominal trans-hybrid loss. In other words, your transmit signal will appear mixed with the receive signal, but at a level 20 dB lower than it was sent into the phone line. The “Auto” feature is very simple. When the “Auto” switch is selected, AutoHybrid will answer on the first ring. The phone line will remain off-hook, until either the Drop button is depressed, or until the phone company releases the line.
Broadcast Host
Desktop Digital Hybrid.
Broadcast Host turns your desktop into a professional broadcast center. Contains everything you need to get talk show quality phone recordings into your mixer or sound card. Connect a mic and headphones for a simple broadcast back to the station. Already at the station? Use Broadcast Host in your newsroom to record high quality interviews. Or you can upload your recorded interview to your podcast. Broadcast Host allows you to send mic and line level signals into the phone line while maintaining excellent separation between your voice and the caller. The stereo output jack on the back of the unit provides your voice on one channel and only the caller’s voice on the other channel. The balanced XLR output jack contains only the caller’s voice filters, each with adjustable delay. The channel processor provides a signal detection logic for all input and output channels, PPM level measurement as well as level control.
Broadcast Host
Desktop Digital Hybrid.
Broadcast Host turns your desktop into a professional broadcast center. Contains everything you need to get talk show quality phone recordings into your mixer or sound card. Connect a mic and headphones for a simple broadcast back to the station. Already at the station? Use Broadcast Host in your newsroom to record high quality interviews. Or you can upload your recorded interview to your podcast. Broadcast Host allows you to send mic and line level signals into the phone line while maintaining excellent separation between your voice and the caller. The stereo output jack on the back of the unit provides your voice on one channel and only the caller’s voice on the other channel. The balanced XLR output jack contains only the caller’s voice filters, each with adjustable delay. The channel processor provides a signal detection logic for all input and output channels, PPM level measurement as well as level control.
THAT-2
Telephone Handset Audio Tap Your Phone with XLR Jacks
Connect THAT-2 between your telephone and handset for quick access to audio in and out of the telephone. The THAT-2 is used by radio stations to record and play sound bytes, and by TV and film sound crews to get IFB dialog over phone lines. The THAT-2 has a three-position switch which accommodates electret, dynamic and carbon telephone handset microphone types. The THAT-2 will emulate the type of microphone that is in the handset and allow you to send audio into many different types of analog and digital PBX sets, as well as ISDN telephones. Simply unplug the handset coily cord form the base of your telephone and plug it directly into the THAT-2. Then, using the supplied cable, connect the THAT-2 back to the telephone and you are all set.
RemoteAmp
Stereo Headphone Amplifier
Cuts through the Crowd Noise. The RemoteAmp is a simple battery-powered personal headphone amplifier. Use the RemoteAmp as an IFB earpiece or headphone amplifier, or as an on-stage monitor headphone amplifier. This low-distortion, ½ watt amplifier will cut through the crowd noise without distortion. The RemoteAmp clips to your belt and accepts a 3-pin XLR audio input from a mixer, distribution amplifier, telephone line hybrid, or a handset interface like our QuickTap IFB. You’ll like the convenience features, such as the separate power switch, which allows you to leave the volume control set at a comfortable level. New to RemoteAmp is a low impedance 3.5mm TRS Stereo Line Input, designed to mix the headphone output of any device into your program feed. This input remains in stereo all the way through to the headphone outputs.
RemoteAmp
Stereo Headphone Amplifier
Cuts through the Crowd Noise. The RemoteAmp is a simple battery-powered personal headphone amplifier. Use the RemoteAmp as an IFB earpiece or headphone amplifier, or as an on-stage monitor headphone amplifier. This low-distortion, ½ watt amplifier will cut through the crowd noise without distortion. The RemoteAmp clips to your belt and accepts a 3-pin XLR audio input from a mixer, distribution amplifier, telephone line hybrid, or a handset interface like our QuickTap IFB. You’ll like the convenience features, such as the separate power switch, which allows you to leave the volume control set at a comfortable level. New to RemoteAmp is a low impedance 3.5mm TRS Stereo Line Input, designed to mix the headphone output of any device into your program feed. This input remains in stereo all the way through to the headphone outputs.
YEARS OF EXPERIENCE
NEW TECHNOLOGIES
DELIVERED WORKFLOWS
%
CUSTOMER SATISFACTION
Seamless migration from our existing legacy system to the latest IP driven workflow. The team is fully trained to handle all aspects of the workflow right from deployment to delivery with round the clock support - SANSKAR GROUP
Prompt Deliveries with good backend support of products - TV18
Very Professional and all the commitments honoured up to the mark. - SKY WIRE BROADCAST
Professional Company with Quick Response Time of Support - SAKAL MEDIA